In our assembly instructions you will find a lot of symbols with different meanings. Here we explain the individual symbols to you in more detail.
The symbols are partly tools which are needed for the mounting of the furniture, but also general hints which should be followed during the mounting.
This symbol requires two persons to be able to assemble the furniture.
A hammer is required for assembly.
The spirit level is required to ensure that the furniture is set up and fixed in scales.
A cross screwdriver and a slotted screwdriver are required to tighten the screws.
The measuring tape is required for spacing measurements.
The drilling machine is needed for drilling through wooden parts, as well as for drilling in the wall for wall mounting. Make sure that you have drills of the required size at hand.
Please make sure that the furniture is not built on tiles, as there is a risk that small cracks and scratches will be caused by the hard floor on the furniture.
If you have any questions about the assembly instructions or if you have problems with the assembly of the furniture, please do not hesitate to contact our customer service. Our colleagues are always pleased to help.
Not for outdoor use
Our furniture are basically only intended for indoor use and are therefore not weather-resistant.
In order to ensure that the furniture does not fall from the wall, the enclosed screw must be attached. Depending on the nature of the wall and the permissible total mass, a dowel must be purchased separately so that the suspension bracket can be properly fitted according to the installation instructions.
Danger of tipping over
In ordert o ensure that the furniture does not tip forwards, the anti-tipper which is provided must be attached. Depending on the nature of the wall, screws and dowels must be purchased separately so that the anti-tipper can be properly fitted according to the installation instructions.